Download

Prior to using your new STARLIGHT™ or SUPERDUTY™ Front Loader, it MUST BE COMPLETELY LUBRICATED as shown on the lube decal located near the rear of the body on the passenger side. (Also see Lubrication section in the Maintenance Checklist). Initial lubrication carried out by Labrie Environmental Group is sufficient for production and transport purposes ONLY! With your safety in mind, we would like to remind you that ONLY QUALIFIED PERSONNEL should service the hydraulic, electrical, and pneumatic systems on your refuse vehicle. In addition, these mechanics should be fully versed in the operation of this unit. Please read the Operator Manual, prior to attempting any maintenance of your Wittke Front Loader. Labrie Environmental Group assumes no liability for any incidental, consequential or other liability from the use of this information. All risks and damages, incidental or otherwise, arising from use or misuse of the information contained herein are entirely the responsibility of the user. Although careful precaution has been taken in the preparation of this material, we assume no responsibility for errors or omissions.As with all hydraulic systems, it may be necessary to periodically check and adjust the pressure relief settings. It may be that a major hydraulic component has been changed, the unit is not performing in terms of payload, or the unit has recently been put into service and the system requires adjustment following a run-in period.

Get from here to download STARLIGHT™ & SUPERDUTY™ MAINTENANCE MANUAL